Holiday bundle
Four Pikas for your Snapmaker U1.
Every bundle comes with 4 Pika hotends, 4 bonus nozzles, 4 bonus boots and a 6 mm socket nozzle wrench. Pick your nozzle setup and go straight to checkout.
In every bundle
One Pika for each U1 toolhead, plus the extras.
4 × Pika hotend
One for each U1 toolhead, each with a .4 nozzle installed.
$420 if bought separately
4 × bonus FIN nozzle
Matched to your bundle: .6 plated copper, .6 plated hardened steel or .2 hardened steel.
$88 if bought separately
4 × silicone boot
A spare boot for every hotend.
$16 if bought separately
6 mm socket nozzle wrench
Swap nozzles right on the toolhead.
$4 if bought separatelyPick your bonus nozzles
Every bundle has the same 4 Pikas, boots and wrench at the same price. The bonus nozzles, and the .4 installed on each Pika, are what change.
EverydayCopper bundle
PLA, PETG, ABS and other everyday filaments
- .4 plated copper installed on all 4
- 4 × .6 plated copper bonus nozzles
- 4 boots and a 6 mm nozzle wrench
AbrasivesHardened steel bundle
Glass and carbon filled filaments
- .4 hardened steel installed on all 4
- 4 × .6 plated hardened steel bonus nozzles
- 4 boots and a 6 mm nozzle wrench
Fine detailDetail bundle
Everyday filaments, plus a .2 for small features
- .4 plated copper installed on all 4
- 4 × .2 hardened steel bonus nozzles
- 4 boots and a 6 mm nozzle wrench
Abrasives + detailDetail steel bundle
Filled filaments, plus a .2 for small features
- .4 hardened steel installed on all 4
- 4 × .2 hardened steel bonus nozzles
- 4 boots and a 6 mm nozzle wrench
Which one?
Copper
PLA · PETG · ABS
Plated copper for everyday printing. The .6 bonus nozzles are for speed.
Hardened steel
ASA-GF · PPS-CF
Plated hardened steel for glass and carbon filled filaments.
Detail
Small features
A .2 nozzle for fine detail. Pick copper or hardened steel for the .4s it ships with.
Why Pika
Up to 80 mm³/s
0.6 mm nozzle, ABS at 280 °C. Up to 60 mm³/s with a 0.4.
Any FIN nozzle. Any size.
.1 to 1.0 mm, swapped right on the toolhead with a 6 mm socket. No disassembly or wiring.
Titanium heatbreak and support structure
No bent or snapped hotends.
Built to be serviced
Take it apart, repair it, put it back together.
| Pika bundle | The other guys* | |
|---|---|---|
| Flow | Up to 80 mm³/s | Up to 55 mm³/s |
| Nozzles | .1 to 1.0, change anytime, no disassembly required | 0.4 only, fixed and disposable |
| Abrasives | Hardened steel, tungsten carbide, Diamondback | Not recommended for carbon or glass filled |
| Durability | Titanium heatbreak and support structure, no bent or snapped hotends | No heatbreak supports, easier to bend |
| Service | Take it apart, repair it, put it back together | No disassembly, no service. Replace the whole hotend |
*A popular high-flow hotend sold for the Snapmaker U1, from its product listing, October 2026. Pika: 0.6 mm nozzle, ABS at 280 °C. Your filament and setup may vary.