PPS-CF Filament - Two Step Process
- Regular price
-
$120.00 - Regular price
-
- Sale price
-
$120.00
A simple, no nonsense PPS-CF made with Luvocom® resin. For those who want a very stable, high-temp survivable plastic that's surprisingly easy to print.
Anneal post printing for best durability & temp resistance.
Quick info:
Color: Black
Filament type: 1.75mm
Quantity: 1KG
Material: PPS-CF
Diameter: 1.75mm
Print Temperatures: 300-350C
Bed Temperatures: 90-110C
Comes on a high-temperature spool - will survive drying at recommended drying temps
Provided mylar packaging is resealable for easy storage
Spool parameters:
Spool diameter: 200mm
Spool width: 67mm
Spool core diameter: 53mm
Minimum filament wind diameter: 98mm
Spool wall thickness: 1.5mm
Couldn't load pickup availability
Extra Information
Health & Safety Disclaimer
Health and Safety Warning
This filament may release toxic fumes (Volatile Organic Compounds) when heated. Carbon fiber filaments present additional risks and require specific handling procedures. Do not sand or process without proper safety equipment.
Required Safety Precautions
Use only in well-ventilated areas
Wear appropriate respiratory protection
Use protective equipment (including gloves)
Handle with proper tools and care
Follow all workplace safety protocols
Legal Disclaimer
The technical data and safety information provided in this document represents our current knowledge of the product's properties, safety requirements, and handling procedures. However, the determination of product suitability for any particular use is the sole responsibility of the user. This product must be evaluated by the user to determine proper safety protocols for their specific application.
No guarantee, warranty, or representation is made regarding the accuracy or completeness of this information, nor its suitability for any specific purpose. The manufacturer expressly disclaims all warranties, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose. The user assumes all responsibility for any damage or injury resulting from handling, use, or misuse of this product.
Customer Reviews
Apologies to all the Bambu users with printers that can't hit 350C and don't have actively heated chambers. As long as your printer meets that criteria and has an abrasion resistant nozzle like the Diamondback in my QIDI Max3, this filament is a piece of cake to print. It's actually a real pleasure.
The only caution is to make sure to add a thin layer of glue for separation, as the PPS-CF has a tendency to overbond to the PEI build plate.
All of the printed parts that are subject to heat or load or both in my RatRig V-CORE4 are printed in this. That's really most of the parts of the printer, to be honest. Additionally, the RatRig has a 1 KW active heater, fully printed in roughly 750 g of this PPS-CF.
What may be considered overkill by some, is merely good, conservative safety practice, and not having to ever worry about the heater ever getting melty.
I typically run it at 335° C, with a 110C build plate, and 65C chamber. Parts come out flat, and are dimensionally accurate.
This moment, this is cheapest high quality PPS-CF around in the US with shipping. Prints easy; prep/post work is all the work as is typical with fancy materials. If you can dry it appropriately, you should keep a spool stocked. It's a cheat code.
