Pika Week
Snapmaker U1 deals
Four Pika hotends and eight FIN nozzles, sized and ready to go. Pick a bundle and go straight to checkout.
Pika Week pricing ends Friday night
Fine detailDetail bundle
Plated copper .2 · .4 · .6
- 4 Pika hotends, .4 plated copper installed
- 4 × .2 and 4 × .6 plated copper nozzles, free
$320$536
SAVE $216
Check out now
Big and fastSpeed bundle
Plated copper .4 · .6 · .8
- 4 Pika hotends, .4 plated copper installed
- 4 × .6 and 4 × .8 plated copper nozzles, free
$320$536
SAVE $216
Check out now
AbrasivesHardened steel bundle
Hardened steel .4 · .6 · .8
- 4 Pika hotends, .4 hardened steel installed
- 4 × .6 and 4 × .8 hardened steel nozzles, free
- Carbon and glass filled filaments
$320$536
SAVE $216
Check out now
Your sizesBuild your own
Any FIN nozzle, any size
- 4 or more Pika hotends, pick the nozzle each one comes with
- Up to 8 plated copper or hardened steel nozzles free
From $320
Build your bundleWhy Pika
Up to 80 mm³/s
0.6 mm nozzle, ABS at 280 °C. Up to 60 mm³/s with a 0.4.
Any FIN nozzle. Any size.
.1 to 1.0 mm, swapped right on the toolhead with a 6 mm socket. No disassembly or wiring.
Titanium heatbreak and support structure
No bent or snapped hotends.
Built to be serviced
Take it apart, repair it, put it back together.
| Pika bundle | The other guys* | |
|---|---|---|
| Flow | Up to 80 mm³/s | Up to 55 mm³/s |
| Nozzles | .1 to 1.0, change anytime, no disassembly required | 0.4 only, fixed and disposable |
| Abrasives | Hardened steel, tungsten carbide, Diamondback | Not recommended for carbon or glass filled |
| Durability | Titanium heatbreak and support structure, no bent or snapped hotends | No heatbreak supports, easier to bend |
| Service | Take it apart, repair it, put it back together | No disassembly, no service. Replace the whole hotend |
*A popular high-flow hotend sold for the Snapmaker U1, from its product listing, October 2026. Pika: 0.6 mm nozzle, ABS at 280 °C. Your filament and setup may vary.