{"title":"Our Most Popular Products","description":"","products":[{"product_id":"pt1000-rtd-sensor-e3d-dragonfly-dragon-mosquito-compatible","title":"PT1000 RTD Sensor","description":"\u003cp\u003e3x15mm Cartridge Works with E3D, Dragonfly, Dragon, Mosquito, and many other hotends\u003c\/p\u003e\n\u003cp\u003ePT1000 Sensor for High-temperature Sensing - 500C!\u003c\/p\u003e\n\u003cp\u003eCLASS A - very precise\u003c\/p\u003e\n\u003cp\u003eTerminated with ferrules\u003c\/p\u003e\n\u003cp\u003eWire color coding is for identification purposes only. This thermistor has no electrical polarity and may be connected in either direction.\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":40896747536569,"sku":"","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20250704_090642_2.jpg?v=1751638155"},{"product_id":"usb-camera-1080p","title":"Nocturne USB Camera","description":"\u003cp\u003ePerfect camera for use with your 3D printer. At 38 X 38mm, it is small enough to mount on 3D printers of any size, with a wide enough lens to monitor your prints remotely.\u003c\/p\u003e\n\u003cp\u003eBuilt in IR LEDs and a motorized IR filter guarantee visibility regardless of lighting conditions.\u003c\/p\u003e\n\u003cp\u003eCan choose between a 1m or 2m USB cable, based on your needs!\u003c\/p\u003e\n\u003cp\u003ePlugs in and runs without configuration on Mainsail, Fluidd, Octoprint - anything that uses Mjpeg streamer or UV4L streamer!\u003c\/p\u003e\n\u003cp\u003eCase Here: \u003ca href=\"https:\/\/www.printables.com\/model\/305428-usb-camera-housing\"\u003ehttps:\/\/www.printables.com\/model\/305428-usb-camera-housing\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Hardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4 M2x20 socket-head screws\u003c\/p\u003e\n\u003cp\u003e4 M2 nuts, for affixing screws to printed assembly\u003c\/p\u003e\n\u003cp\u003e1 M5x20 screw\u003c\/p\u003e\n\u003cp\u003e1 M5 Nut\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e Overview:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eLens:\u003c\/strong\u003e Customized\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImaging:\u003c\/strong\u003e 1080P\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeed:\u003c\/strong\u003e up to 30fps (dependent on lighting, the computer attached, and several other factors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e \u003cspan\u003e003-0353\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Features:\u003c\/strong\u003e Motion tracking, Face detection, Night Vision, Spaghetti Detection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Wide Angle Lens, 96 Degree FOV\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVideo compression Format:\u003c\/strong\u003e \u003cspan\u003eH.264\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor: \u003c\/strong\u003e\u003cspan\u003eCMOS, CCD\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTemperature Rating: \u003c\/strong\u003e-20°C to +70°C  (-4F to 158F)\u003c\/p\u003e\n\u003cp\u003e*Due to the increased price of tariffs levied on this new batch, we have increased the price as of 1\/24\/2025* \u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"1m","offer_id":51676017951021,"sku":null,"price":40.0,"currency_code":"USD","in_stock":false},{"title":"2m","offer_id":51676017983789,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/products\/DSC066930001.jpg?v=1667061718"},{"product_id":"high-wattage-heater","title":"High Wattage Cartridge Heaters - 24v \u0026 48v","description":"\u003cp\u003eWe are gradually switching over to a new heater supplier, so some shipped heaters will be the original high-wattage heaters (white sleeving) and some will be the new ones (beige sleeving). Once we are out of the white sleeving version, beige will be shipped instead.\u003c\/p\u003e\n\u003cp\u003e Details as of 9\/23\/2025:\u003c\/p\u003e\n\u003cp\u003eStandard 24V:\u003c\/p\u003e\n\u003cp\u003e50W: old version\u003c\/p\u003e\n\u003cp\u003e80W: new version\u003c\/p\u003e\n\u003cp\u003e100W: new version\u003c\/p\u003e\n\u003cp\u003e120W new version\u003c\/p\u003e\n\u003cp\u003eSupervolcano 24V:\u003c\/p\u003e\n\u003cp\u003e80W: old version\u003c\/p\u003e\n\u003cp\u003e100W: new version\u003c\/p\u003e\n\u003cp\u003e120W: new version\u003c\/p\u003e\n\u003cp\u003e140W: new version\u003c\/p\u003e\n\u003cp\u003e48V: all 48V heaters will ship with the original sleeving at this time.\u003c\/p\u003e\n\u003cp\u003eCartridge Heaters\u003c\/p\u003e\n\u003cp\u003eSizes: 6mm Diameter, 20mm and 47mm length\u003c\/p\u003e\n\u003cp\u003eWattage: 50, 80, 100, 120, 140w\u003c\/p\u003e\n\u003cp\u003eVoltages: 24, 48V\u003c\/p\u003e\n\u003cp\u003eCasing: Rated for 500c Continuous Usage, Wires rated for up to 300c Chamber.\u003c\/p\u003e\n\u003cp\u003e Gauge: 18ga\u003c\/p\u003e\n\u003cp\u003eWire Length: 150mm\u003c\/p\u003e\n\u003cp\u003eYou are responsible for your own setup and installation. Use BN paste on the heater cartridge before installing in your hotend.\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"50 \/ Standard (6x20) \/ 24v","offer_id":48058446512429,"sku":"","price":16.0,"currency_code":"USD","in_stock":false},{"title":"80 \/ Standard (6x20) \/ 24v","offer_id":44338658148653,"sku":"","price":19.0,"currency_code":"USD","in_stock":false},{"title":"80 \/ Standard (6x20) \/ 48v","offer_id":47315067175213,"sku":"","price":19.0,"currency_code":"USD","in_stock":true},{"title":"80 \/ Supervolcano (6x47) \/ 24v","offer_id":47315067207981,"sku":"","price":19.0,"currency_code":"USD","in_stock":true},{"title":"80 \/ Supervolcano (6x47) \/ 48v","offer_id":47315067240749,"sku":"","price":19.0,"currency_code":"USD","in_stock":true},{"title":"100 \/ Standard (6x20) \/ 24v","offer_id":47315067273517,"sku":"","price":23.0,"currency_code":"USD","in_stock":true},{"title":"100 \/ Standard (6x20) \/ 48v","offer_id":47315067306285,"sku":"","price":23.0,"currency_code":"USD","in_stock":true},{"title":"100 \/ Supervolcano (6x47) \/ 24v","offer_id":47315067339053,"sku":"","price":22.0,"currency_code":"USD","in_stock":true},{"title":"100 \/ Supervolcano (6x47) \/ 48v","offer_id":47315067371821,"sku":"","price":22.0,"currency_code":"USD","in_stock":true},{"title":"120 \/ Standard (6x20) \/ 24v","offer_id":44338658181421,"sku":"","price":27.0,"currency_code":"USD","in_stock":true},{"title":"120 \/ Standard (6x20) \/ 48v","offer_id":47315067404589,"sku":"","price":27.0,"currency_code":"USD","in_stock":true},{"title":"120 \/ Supervolcano (6x47) \/ 24v","offer_id":47315067437357,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"120 \/ Supervolcano (6x47) \/ 48v","offer_id":47315067470125,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"140 \/ Supervolcano (6x47) \/ 24v","offer_id":47315067568429,"sku":"","price":28.0,"currency_code":"USD","in_stock":true},{"title":"140 \/ Supervolcano (6x47) \/ 48v","offer_id":47315067601197,"sku":"","price":28.0,"currency_code":"USD","in_stock":false},{"title":"50 \/ Standard (6x20) \/ 48v","offer_id":48058495533357,"sku":"","price":16.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/DSC06918_4b9a3ee6-0ccc-490b-ab71-eadfd247a0f8.jpg?v=1722544653"},{"product_id":"chube-air","title":"Chube Air - Backordered","description":"\u003cp\u003e\u003cstrong\u003eShipment for Orders placed before 2\/26 are now expected to ship in April\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipment for Orders placed after 2\/26 are expected to ship in May\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFrustrated by the market’s lack of a proper high-performance hotend? Still searching for something better than what you’ve seen again and again? Look no further – The Chube Hotend meets all requirements for high-flow, high-speed, high-temperature printing in a reliable, cost effective, patent-pending solution. There’s nothing that comes close in a similar package. We have your answer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMassive meltzone in a compact hotend \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eBoasting either a 42mm or 52mm long meltzone in the Air or Conduction configurations, the Chube Hotend is one of the most compact high-flow hotends on the market. With all that meltzone, the Chube Hotend is lightweight: the Air weighs in at 69g, and the Conduction at 74g. The overall length vs meltzone ratio is unparalleled. The grams per meltzone in a 500c capable hotend is unmatched. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing Chalice Heatbreak technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Chalice Heatbreak uses aerospace materials combined with a hardened, lubricious surface treatment to provide an unrivaled printing experience. The thin, unibody break can withstand extreme temperatures and abrasive materials with ease while \u003c\/span\u003e\u003ci\u003e\u003cspan style=\"font-weight: 400;\"\u003estill \u003c\/span\u003e\u003c\/i\u003e\u003cspan style=\"font-weight: 400;\"\u003epreventing heat creep; keeping the surrounding components cold. The cup design of Chalice provides an ideal seat for the bowden tube and smoothly guides filament into the generous meltzone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll components rated for 500c operation - including the provided metal cooling shield!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEvery part of the Chube Hotend is crafted from the finest materials available, and is designed to take abuse from most punishing polymers and environments. Every component in the Chube Hotend is rated for a 500c block and 300c ambient environment. The integrated stainless steel part-cooling shield protects the Chube Hotend from thermal shock and keeps the polymer flowing, with an added bonus of reduced power draw, compared to silicone based solutions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtremely stiff for faster printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe patent-pending \u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=5N16K7eRTsA\"\u003e\u003cspan style=\"font-weight: 400;\"\u003etube\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e [\/tʃuːb\/] structure of the Chube provides an exceptional high-speed printing experience. Strength is a core property of the Chube design. No more broken hotends from nozzle swaps. No more failed supports, or snapped heatbreaks, from barely-lifted prints. The strength and rigidity also translates to print quality - reducing deflection during acceleration provides a faster, cleaner print; increasing productivity while retaining part quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses Standardized Components\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe believe in standards. The Chube Hotend maintains compatibility with common RepRap nozzles, cartridge heaters, and temperature sensors. All components are easily available and non-proprietary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo more tiny threads - M3 only! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHowever, some standards need to change for the better.  Operators can rejoice that the Chube Hotend is assembled and mounted with M3 hardware - not M2.5, not M1.6, no smaller hardware is anywhere on the unit. Not only does the Chube Hotend have M3 hardware, but the flathead screws are torx, which significantly reduces the likelihood of stripping. \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eIn addition to user-friendly hardware, the Chube Hotend also utilizes a new 6x18mm bolt pattern: this provides multiple fastening options, unidirectional strength, and a reliable connection to your motion system, even with plastic toolheads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e100% Manufactured and Assembled in the USA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWhat's included with my Chube Hotend?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 torx key\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 hex key\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 spare grub screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 spare torx screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eChube sticker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eLuke's Lab sticker\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/plugandplay.lukeslabonline.com\/knowledge\/article\/108\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChube Air Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/plugandplay.lukeslabonline.com\/knowledge\/article\/109\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChube Air Heater and PT1000 Installation\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/plugandplay.lukeslabonline.com\/knowledge\/article\/110\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChube Air Heater and PT1000 Removal\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"V6","offer_id":51769746489645,"sku":null,"price":260.0,"currency_code":"USD","in_stock":true},{"title":"Volcano","offer_id":51769746522413,"sku":null,"price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20250619_104751_1_2.jpg?v=1759948052"},{"product_id":"chube-conduction","title":"Chube Conduction - Backordered","description":"\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eShipment for Orders placed before 2\/26 are now expected to ship in April\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipment for Orders placed after 2\/26 are expected to ship in May\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFrustrated by the market’s lack of a proper high-performance hotend? Still searching for something better than what you’ve seen again and again? Look no further – The Chube Hotend meets all requirements for high-flow, high-speed, high-temperature printing in a reliable, cost effective, patent-pending solution. There’s nothing that comes close in a similar package. We have your answer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMassive meltzone in a compact hotend \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eBoasting either a 42mm or 52mm long meltzone in the Air or Conduction configurations, the Chube Hotend is one of the most compact high-flow hotends on the market. With all that meltzone, the Chube Hotend is lightweight: the Air weighs in at 69g, and the Conduction at 74g. The overall length vs meltzone ratio is unparalleled. The grams per meltzone in a 500c capable hotend is unmatched. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing Chalice Heatbreak technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe Chalice Heatbreak uses aerospace materials combined with a hardened, lubricious surface treatment to provide an unrivaled printing experience. The thin, unibody break can withstand extreme temperatures and abrasive materials with ease while\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan style=\"font-weight: 400;\"\u003estill\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/i\u003e\u003cspan style=\"font-weight: 400;\"\u003epreventing heat creep; keeping the surrounding components cold. The cup design of Chalice provides an ideal seat for the bowden tube and smoothly guides filament into the generous meltzone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll components rated for 500c operation - including the provided metal cooling shield!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eEvery part of the Chube Hotend is crafted from the finest materials available, and is designed to take abuse from most punishing polymers and environments. Every component in the Chube Hotend is rated for a 500c block and 300c ambient environment. The integrated stainless steel part-cooling shield protects the Chube Hotend from thermal shock and keeps the polymer flowing, with an added bonus of reduced power draw, compared to silicone based solutions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtremely stiff for faster printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe patent-pending\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=5N16K7eRTsA\"\u003e\u003cspan style=\"font-weight: 400;\"\u003etube\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003e[\/tʃuːb\/] structure of the Chube provides an exceptional high-speed printing experience. Strength is a core property of the Chube design. No more broken hotends from nozzle swaps. No more failed supports, or snapped heatbreaks, from barely-lifted prints. The strength and rigidity also translates to print quality - reducing deflection during acceleration provides a faster, cleaner print; increasing productivity while retaining part quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses Standardized Components\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe believe in standards. The Chube Hotend maintains compatibility with common RepRap nozzles, cartridge heaters, and temperature sensors. All components are easily available and non-proprietary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo more tiny threads - M3 only! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHowever, some standards need to change for the better.  Operators can rejoice that the Chube Hotend is assembled and mounted with M3 hardware - not M2.5, not M1.6, no smaller hardware is anywhere on the unit. Not only does the Chube Hotend have M3 hardware, but the flathead screws are torx, which significantly reduces the likelihood of stripping.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eIn addition to user-friendly hardware, the Chube Hotend also utilizes a new 6x18mm bolt pattern: this provides multiple fastening options, unidirectional strength, and a reliable connection to your motion system, even with plastic toolheads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e100% Manufactured and Assembled in the USA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWhat's included with my Chube Hotend?\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 torx key\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 hex key\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 spare grub screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 spare torx screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eChube sticker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eLuke's Lab sticker\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstalling your own heater and thermistor? Find out how here: \u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Heater and thermistor installation\" href=\"https:\/\/youtu.be\/ap-Gu3fYrsY?si=MjbQXdm_oo4v9aqO\"\u003ehttps:\/\/youtu.be\/ap-Gu3fYrsY?si=MjbQXdm_oo4v9aqO\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/plugandplay.lukeslabonline.com\/knowledge\/article\/111\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChube Conduction Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/plugandplay.lukeslabonline.com\/knowledge\/article\/112\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eChube Conduction Heater and PT1000 Installation\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"V6","offer_id":51611272053037,"sku":null,"price":320.0,"currency_code":"USD","in_stock":true},{"title":"Volcano","offer_id":51611272085805,"sku":null,"price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20241107_143927_2_1.jpg?v=1759948102"},{"product_id":"tungsten-carbide-nozzle","title":"Tungsten Carbide (TC) V6 Nozzle","description":"\u003cp\u003eWe are now offering some of our nozzles with AlTiSiN coating!\u003c\/p\u003e\n\u003cp\u003eGrade K20\/WC 94%\u003cbr\u003eHardness(HRA)  \u0026gt;90.00\u003c\/p\u003e\n\u003cp\u003eSize: V6 Reprap\u003c\/p\u003e\n\u003cp\u003eA good tungsten carbide nozzle won't wear even with the heaviest of abrasive-filled materials and is still an excellent conductor of heat for effortless printing. \u003c\/p\u003e\n\u003cp\u003e*Prices have gone up due to the new tariffs, we are hopeful we will be able to drop prices back down in the future*\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":".4 \/ No Coating","offer_id":47862913925421,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":".4 \/ AlTiSiN","offer_id":51834700955949,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":".5 \/ No Coating","offer_id":47862913958189,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":".5 \/ AlTiSiN","offer_id":51834700988717,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":".6 \/ No Coating","offer_id":47862913990957,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":".6 \/ AlTiSiN","offer_id":51834701021485,"sku":null,"price":50.0,"currency_code":"USD","in_stock":false},{"title":".8 \/ No Coating","offer_id":47862914023725,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":".8 \/ AlTiSiN","offer_id":51834701054253,"sku":null,"price":50.0,"currency_code":"USD","in_stock":false},{"title":"1.0 \/ No Coating","offer_id":47862914056493,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"1.0 \/ AlTiSiN","offer_id":51834701087021,"sku":null,"price":55.0,"currency_code":"USD","in_stock":false},{"title":"1.2 \/ No Coating","offer_id":47862914089261,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"1.2 \/ AlTiSiN","offer_id":51834701119789,"sku":null,"price":55.0,"currency_code":"USD","in_stock":false},{"title":"1.4 \/ No Coating","offer_id":47862914122029,"sku":"","price":55.0,"currency_code":"USD","in_stock":false},{"title":"1.4 \/ AlTiSiN","offer_id":51834701152557,"sku":null,"price":55.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/DSC06898_a8100d60-da51-43de-9016-b6034bd7ed82.jpg?v=1738943933"},{"product_id":"k3-metal-toolhead-kit","title":"K3 Metal Toolhead Kit","description":"\u003cp\u003eMain toolhead parts are now bead-blasted, for even more accurate flatness!\u003c\/p\u003e\n\u003cp\u003eKit contains 3 plates for Annex Engineering K3 metal toolhead. We do not currently have spacers. \u003c\/p\u003e\n\u003cp\u003eCompatible with k3rabiner with using a Sherpa extruder.\u003c\/p\u003e\n\u003cp\u003eCompatible with Chube, Slice and Dragon hotends.\u003c\/p\u003e\n\u003cp\u003eThanks to Cbon for original idea and design\u003cbr\u003eThanks to MathematicalPotato for this iteration of the set.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/github.com\/MathematicalPotato\/DooKi3-Toolhead\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":48107367334189,"sku":"toolheadk3","price":36.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20251008_111331_2_1.jpg?v=1759942890"},{"product_id":"provok3d-nozzle-adxl","title":"Provok3d Nozzle Adxl","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePat Pending: US 18\/467,184\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 Layer PcB\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSurface finish: ENIG\/gold plated   INFO\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.venture-mfg.com\/enig-pcb-the-ultimate-faq-guide\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.venture-mfg.com\/enig-pcb-the-ultimate-faq-guide\/\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounts where you need to measure vibrations\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo extra parts needed for installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStm32 based Shipped\/Pre flashed with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/mattthebaker\/ampon_anchor\/tree\/ampon_f042\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/github.com\/mattthebaker\/ampon_anchor\/tree\/ampon_f042\"\u003eAmpon\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/a\u003e a fork of\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/Annex-Engineering\/crampon_anchor\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/github.com\/Annex-Engineering\/crampon_anchor\"\u003eCrampon\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlug n Play\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVersion 1.3 uses f042 branch v 1 uses f072 branch of ampon\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWater-heater Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e⚠️THIS DOES NOT STAY ON  DO NOT HEAT HOTEND WHILE BOARDS ATTATCHED⚠️\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":48579732767021,"sku":"0198168602072","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20240815-143942_2.jpg?v=1723751280"},{"product_id":"lgx-lite-pro-extruder","title":"LGX Lite PRO eXtruder","description":"\u003cp\u003e\u003cstrong\u003eWhy LGX Lite Pro?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh\u003cspan\u003e \u003c\/span\u003e\u003cb\u003etorque\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eMore\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ePre-tension presets\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eV2 style\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehousing build\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eincreased\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eresistance to heat\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003emicro form factor\u003c\/b\u003e, featherweight and small footprint;\u003c\/li\u003e\n\u003cli\u003eand large drive wheels for enhanced\u003cspan\u003e \u003c\/span\u003e\u003cb\u003efilament grip\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes full size\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLGX\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSteel Drive Train, maintenance windows and filament tension lever with 5 presets (open, rigid, hard rigid\/semi flexible, flexible, soft flexible ).\u003c\/p\u003e\n\u003cp\u003eLGX Lite Pro is an extruder we highly recommend for use with the Chube Hotend. -Luke's Lab Team\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis extruder only supports 1.75 mm size filament.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe Bondtech \u003c\/span\u003e\u003cb\u003eLGX Lite PRO\u003c\/b\u003e\u003cspan\u003e is a filament feeder based on the LGX® Large Gears eXtruder and uses\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eBondtech's Dual Drive Technology based on larger drive gears\u003c\/b\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"gap-element clearfix\" id=\"gap-1896724932\"\u003e\u003c\/div\u003e\n\u003cblockquote\u003e\n\u003csmall\u003eEach\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX Lite PRO\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eextruder is supplied with:\u003c\/small\u003e\n\u003cul\u003e\n\u003cli\u003e1x\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX Lite PRO\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efeeder;\u003c\/li\u003e\n\u003cli\u003e1x Nema14 Round 22mm pancake stepper motor (mounted on extruder)\n\u003cul\u003e\n\u003cli\u003e1m long lead cable\u003c\/li\u003e\n\u003cli\u003ewith JST-XH 4-pin connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 2mm Hex Key (recommended tool)\u003c\/li\u003e\n\u003cli\u003e1x Powered By Bondtech sticker\u003c\/li\u003e\n\u003c\/ul\u003e\nAlso shipping with additional accessories:\n\u003cul\u003e\n\u003cli\u003e1x Push-fit collar (inserted)\u003c\/li\u003e\n\u003cli\u003e1x 30mm PTFE tube to use in the PTFE Tube Adapter\u003c\/li\u003e\n\u003cli\u003e8x M3 square nuts for reinforcing mounting holes (inserted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":48891047280941,"sku":"1243254563412341","price":130.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/Bondtech_EXT01LGX41012_LGX-Lite-PRO-eXtruder_3012-HDR-scaled.jpg?v=1715105302"},{"product_id":"lgx-pro-large-gears-extruder","title":"LGX PRO Large Gears eXtruder - 1.75","description":"\u003cp\u003eA stronger and more robust LGX Large Gears eXtruder for industrial application with\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e1.75mm filaments\u003c\/b\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHarder\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: steel drive train;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFaster\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: higher max feed rate;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStronger\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: more push force;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTougher\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: housing with higher heat tolerance;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCleaner\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: sober design.\u003c\/li\u003e\n\u003cli\u003eJust\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBetter\u003c\/b\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e1x (\u003cb\u003eFREE\u003c\/b\u003e) Aluminum Interface Plug;\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":48924013887789,"sku":"EXT-LGX-PRO","price":164.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/LGX_Pro_Large_Gears_eXtruder_EXT-LGX-PRO_2009-scaled.jpg?v=1715443508"},{"product_id":"bondtech-cht-®-m6-coated-brass-nozzle","title":"Bondtech CHT ® M6 Coated Brass Nozzle","description":"\u003cp\u003eThis Bondtech CHT ® RepRap M6 (MOS) nozzle\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eincreases the melting capacity\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eof your hotend, to\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ebuild faster\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand to\u003cspan\u003e \u003c\/span\u003e\u003cb\u003esave your time\u003c\/b\u003e. It also\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eimproves the layer adhesion\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eof your 3D prints to create\u003cspan\u003e \u003c\/span\u003e\u003cb\u003estronger parts\u003c\/b\u003e.\u003cbr\u003eFind the compatibility list and product alerts tabs below.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrass body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Lukes Laboratory","offers":[{"title":"0.25","offer_id":51582061216045,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"0.4","offer_id":48924143092013,"sku":"600-C-CHT-MOS-175-14","price":19.9,"currency_code":"USD","in_stock":false},{"title":"0.5","offer_id":48924143124781,"sku":"600-C-CHT-MOS-175-15","price":19.9,"currency_code":"USD","in_stock":true},{"title":"0.6","offer_id":48924143157549,"sku":"600-C-CHT-MOS-175-16","price":19.9,"currency_code":"USD","in_stock":true},{"title":"0.8","offer_id":48924143190317,"sku":"600-C-CHT-MOS-175-17","price":19.9,"currency_code":"USD","in_stock":true},{"title":"1","offer_id":48924143223085,"sku":"600-C-CHT-MOS-175-18","price":19.9,"currency_code":"USD","in_stock":true},{"title":"1.4","offer_id":48924143255853,"sku":"600-C-CHT-MOS-175-19","price":19.9,"currency_code":"USD","in_stock":true},{"title":"1.8","offer_id":48924143288621,"sku":"600-C-CHT-MOS-175-20","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20240814_113849_2.jpg?v=1723654352"},{"product_id":"chube-lgx-champ","title":"LGX CHAMP Adapter: Chube Conduction Heatsink","description":"\u003cp\u003eCompatible with Chube Conduction, the LGX CHAMP Adapter provides a direct-mount option for LGX users. This adapter is perfect for achieving ultimate flow and stability by combining Chube Conduction with the Bondtech LGX Pro or Pro Metal.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in Heatsink for Chube Conduction\u003c\/li\u003e\n\u003cli\u003eQualifies as the extra metal mount required for Chube Conduction\u003c\/li\u003e\n\u003cli\u003eSupports 40mm fan for cooling both extruder and hotend!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove your Chube Conduction's heatsink. There are 3 torx screws holding it in.\u003c\/li\u003e\n\u003cli\u003eInsert the part of the adapter that resembles the original heatsink.\u003c\/li\u003e\n\u003cli\u003eCenter the holes on the CHAMP adapter on the Chube's shroud.\u003c\/li\u003e\n\u003cli\u003eReinstall the 3 torx screws. Be sure to tighten fully.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Chube Champ adapter for LGX\" href=\"https:\/\/plugandplay.lukeslabonline.com\/odoo\/documents\/ybx7RlvFTE2PsAtePK_ymgo4e\" target=\"_blank\"\u003eIntegration cad here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: in order for your heater to be properly installed, be sure that the open part of the sink aligns with the designated cutout on Chube's shroud. \u003c\/p\u003e\n\u003c!----\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":49401609388333,"sku":"Adapt1456","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20240607_133431_3.jpg?v=1718214875"},{"product_id":"chube-air-waterblock","title":"Chube Air Water Block","description":"\u003cp\u003eDoes your 3D-Printer already have water-cooling, and you'd like to integrate Chube Air into your system? Well now we've got a water block for you!\u003c\/p\u003e\n\u003cp\u003eJust remove Chube Air's typical heatsink, and replace with this water-block to integrate into your water-cooled 3dp system.\u003c\/p\u003e\n\u003cp\u003eInformation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eM4 threads for fittings\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":49643433722157,"sku":"chubeairw0tr","price":60.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/IMG_4636-removebg.png?v=1720817761"},{"product_id":"lgx-pro-metal-1-75-extruder","title":"LGX PRO Metal 1.75 eXtruder","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eA\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efull metal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003estronger and more robust LGX Large Gears eXtruder for industrial and high temperature applications with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.75mm filaments\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHarder\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: steel drive train;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFaster\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: higher max feed rate;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStronger\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: more push force;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTougher\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: Aluminum housing;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCleaner\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: sober design.\u003c\/li\u003e\n\u003cli\u003eEven\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBetter\u003c\/b\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDescription:\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003eEach\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX® Pro Metal 1.75\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eextruder is supplied with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX® Pro Metal 1.75mm\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efeeder;\u003c\/li\u003e\n\u003cli\u003e1x Custom Nema17 30mm pancake stepper motor;\u003c\/li\u003e\n\u003cli\u003e1x Metal Push-in fitting M7 4mm;\u003c\/li\u003e\n\u003cli\u003e1x 2mm Hex Key (recommended tool);\u003c\/li\u003e\n\u003cli\u003e1x Powered By Bondtech sticker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso shipping with additional accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x M3x23 mm Stud with 5mm Hex with M3x4 thread;\u003c\/li\u003e\n\u003cli\u003e30mm PTFE tube to use in the Direct Drive Interface Plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003e\u003cstrong\u003eThis extruder only supports 1.75 mm size filament.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX® Pro Metal eXtruder\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003euses\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBondtech’s new Dual Drive Technology\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ebased on\u003cspan\u003e \u003c\/span\u003e\u003cb\u003elarge drive gears\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch4\u003e10 cool features of the Bondtech LGX Pro Metal :\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum housing\u003c\/li\u003e\n\u003cli\u003eStrong 30mm stepper motor\u003c\/li\u003e\n\u003cli\u003eLarger drive wheels, for increased filament grip;\u003c\/li\u003e\n\u003cli\u003eNew filament pre-tension lever – open + 4 positions – for repeated results;\u003c\/li\u003e\n\u003cli\u003eMulti-function interface socket, for tool or application quick swap;\u003c\/li\u003e\n\u003cli\u003eCompact, light \u0026amp; symmetric design, for increased performance and compatibility;\u003c\/li\u003e\n\u003cli\u003eMultiple mounting hole patterns, for easy and flexible setup;\u003c\/li\u003e\n\u003cli\u003eFull Hardened Steel Drive Train;\u003c\/li\u003e\n\u003cli\u003eSupport longer hotends with the Aluminum Interface Plug;\u003c\/li\u003e\n\u003cli\u003eMore protection against dust or particle saturated industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":49820033253677,"sku":"EXT01LGX41036","price":249.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-3_3750x2500-scaled.jpg?v=1723578344"},{"product_id":"sherpa-heavy-motor-ldo-42sth20-1004ashig7t","title":"Sherpa Heavy Motor LDO-42STH20-1004ASH(IG7T)","description":"\u003cp\u003eThis Sherpa Heavy Motor is especially for Annex Engineering projects.\u003c\/p\u003e\n\u003cp\u003eRecommended for use with Sherpa Extruders.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":49825960296749,"sku":"LDO1004ASHIG7T","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20240815_133353_2.jpg?v=1723748719"},{"product_id":"takeoff-toolhead","title":"Takeoff Toolhead","description":"\u003cp\u003eLooking for simple, metal, bolt-on toolhead for your Voron or other front-mounted Mgn12 rail machine? Look no further.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eWhat is the Takeoff toolhead?\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eA SLM Toolhead using 3628s and \u003c\/span\u003e\u003ca href=\"https:\/\/chubehotend.com\/\" rel=\"nofollow\"\u003eChube\u003c\/a\u003e\u003cspan\u003e without any X loss and potentially no Y loss! (17mm loss only on Trident w\/out Clickyclack or other mods)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eCompatible Extruders:\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch5 dir=\"auto\"\u003eOption A Has mounts for:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003eLGX Lite Pro\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eVz-Hextrudort\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eSherpa mini (NO K FACE)\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eSherpa Micro (With K Face). Mellows sherpa micro k face isn't supported as it's not the stock length.\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eOrbiter 2\/ Peopoly Lancer Orbiter 2 mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 dir=\"auto\"\u003eOption B Has mounts for:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003eSherpa Mini (with K face), Fysetc CNC Sherpa mini supported\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003ePeopoly Lancer new\/old (rotated COM for both)\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eDFA\/ Orbiter Ascender (PENDING OA Release)\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eA3DP FXD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePurrfect Options have whiskers!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFind the cad and more here: \u003ca title=\"Takeoff Toolhead Github\" href=\"https:\/\/github.com\/Kizime123\/Takeoff-Toolhead\"\u003ehttps:\/\/github.com\/Kizime123\/Takeoff-Toolhead \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach sale will give $5 to takeoff's designer.\u003c\/p\u003e\n\u003cp\u003eIncludes belt clamps \u0026amp; hardware\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Standard","offer_id":51033564807469,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Watercooled","offer_id":51033564840237,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20250207_112644_2.jpg?v=1738950252"},{"product_id":"slm-mounting-bracket-for-lgx-pro-and-pro-metal","title":"SLM HUG bracket for mounting LGX Pro and Pro Metal","description":"\u003cp\u003eThis SLM mounting bracket allows you to integrate LGX Pro and Pro Metal onto several toolheads, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStablebot Toohead\u003c\/li\u003e\n\u003cli\u003eTakeoff Toolhead (only with top plate B or Purrfect B)\u003c\/li\u003e\n\u003cli\u003eCalamity toolhead\u003c\/li\u003e\n\u003cli\u003eA community member's Ratrig toolhead mod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis bracket has the same mounting pattern as the A3DP FXD extruder.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Luke's Laboratory","offers":[{"title":"Default Title","offer_id":50186669719853,"sku":"","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20241111_134811_2.jpg?v=1731356686"},{"product_id":"titanium-chube-shield","title":"Titanium Chube Shield","description":"\u003cp\u003eIntroducing the Titanium Chube Shield, by Burgo's Machinations. Make your Chube look hot while keeping cool. This shield is not only stylish, but also improves your thermal performance!\u003c\/p\u003e\n\u003cp\u003eInformation: Currently, only the \"natural\" option is available. In the future, we will be selling polished and anodized ones as well. Note: the polished\/anodized ones will be *at least* $40, the process is time-consuming, and we will be hiring that out.\u003c\/p\u003e\n\u003cp\u003eMaterial\/Manu: SLM Titanium\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir\/Conduction Version:\u003c\/strong\u003e Fits on both Chube Air and Chube Conduction with the original torx screws. Too large for Chube Compact.\u003c\/p\u003e\n\u003cp\u003ePerformance: Improves your Chube's thermal performance by an average of 15.7%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Version:\u003c\/strong\u003e Fits Chube Compact, too small for the Air and Conduction versions. Still utilizes the stock torx screws!\u003c\/p\u003e\n\u003cp\u003ePerformance: Thermal performance improvements are minimal. For Compact, the Titanium Shield makes the most sense for using printing above 300C, or users who prefer the appearance of this shield.\u003c\/p\u003e\n\u003cp\u003eNote: unlike the stock shield, which is stainless steel, this shield will require removal for nozzle changes. This may not be important if you prefer to use the same nozzle for a majority of your printing needs, but we do recognize that some people change nozzles more frequently.\u003c\/p\u003e\n\u003cp\u003ePost-processing may be required by the user. Like FDM printing, SLM is an imprecise process, and each shield will be slightly different. They should all still fit the hotends, but some may require sanding for the best fitment.\u003c\/p\u003e\n\u003cp\u003eData:\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Data\" href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1cdAn66VrNfWFRrTRQm_AtEmMJo1ip_pkb9RN2083SGY\/edit?gid=0#gid=0\"\u003ehttps:\/\/docs.google.com\/spreadsheets\/d\/1cdAn66VrNfWFRrTRQm_AtEmMJo1ip_pkb9RN2083SGY\/edit?gid=0#gid=0\u003c\/a\u003e\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Natural Titanium \/ Air\/Conduction","offer_id":50270304928045,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Natural Titanium \/ Compact","offer_id":51632068297005,"sku":null,"price":25.0,"currency_code":"USD","in_stock":false},{"title":"LL\/Air Blue \/ Air\/Conduction","offer_id":50270304960813,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"LL\/Air Blue \/ Compact","offer_id":51632068329773,"sku":null,"price":25.0,"currency_code":"USD","in_stock":false},{"title":"Rainbow \/ Air\/Conduction","offer_id":50270304993581,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"Rainbow \/ Compact","offer_id":51632068362541,"sku":null,"price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20250403_114305_2.jpg?v=1743698872"},{"product_id":"asa-gf-two-step-process-filament","title":"ASA-GF -  Two Step Process Filament","description":"\u003cp\u003eA glass-filled ASA for your Two Step Process needs!\u003c\/p\u003e\n\u003cp\u003eEnjoy the durability of ASA with the extra stiffness and strength of glass fibers!\u003c\/p\u003e\n\u003ch4\u003eQuick Info:\u003c\/h4\u003e\n\u003cp\u003eColor: Black\u003c\/p\u003e\n\u003cp\u003eFilament type: 1.75mm\u003c\/p\u003e\n\u003cp\u003eQuantity: 1KG\u003c\/p\u003e\n\u003cp\u003eMaterial: ASA-GF \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter: 1.75mm\u003c\/p\u003e\n\u003cp\u003ePrint Temperatures: 240-260C\u003c\/p\u003e\n\u003cp\u003eBed Temperatures: 100-110C\u003c\/p\u003e\n\u003cp\u003eHeated Chamber Recommended - 60-80C\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eComes on a high-temperature spool - will survive drying at recommended drying temps\u003c\/p\u003e\n\u003cp\u003eProvided mylar packaging is resealable for easy storage\u003c\/p\u003e\n\u003cp\u003eSpool parameters:\u003c\/p\u003e\n\u003cp\u003eSpool diameter: 200mm\u003cbr\u003eSpool width: 67mm\u003cbr\u003eSpool core diameter: 53mm\u003cbr\u003eMinimum filament wind diameter: 98mm\u003cbr\u003eSpool wall thickness: 1.5mm\u003c\/p\u003e","brand":"Luke's Laboratory","offers":[{"title":"Default Title","offer_id":50415059468589,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/ASAGFFRONT.jpg?v=1737413660"},{"product_id":"fin-tungsten-carbide-nozzle-two-step-process","title":"FIN Tungsten Carbide Nozzle with AlTiSiN Coating - Two Step Process","description":"\u003cp\u003eGrade K20\/WC 94%\u003cbr\u003eHardness(HRA)  \u0026gt;90.00\u003c\/p\u003e\n\u003cp\u003eSize: FIN\u003c\/p\u003e\n\u003cp\u003eCoating: \u003cspan\u003eAlTiSiN\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA good tungsten carbide nozzle won't wear even with the heaviest of abrasive-filled materials and is still an excellent conductor of heat for effortless printing. \u003c\/p\u003e\n\u003cp\u003ePerfect addition for your Mako or Pika hotend!\u003c\/p\u003e\n\u003cp\u003eNozzle Wrench: FIN nozzles can be removed with a 6mm hex\u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":".4","offer_id":50612958495021,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":".5","offer_id":50612958527789,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":".6","offer_id":50612958560557,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":".8","offer_id":52182504309037,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20250403_085931_2.jpg?v=1743689841"},{"product_id":"bondtech-cht-®-m6-coated-brass-nozzle-copy","title":"Bondtech CHT ® FIN Coated Copper Nozzle","description":"\u003cp\u003eFIN CHT:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow Thermal expansion for improved seal pressure.\u003c\/li\u003e\n\u003cli\u003eBetter Silicone boot heat block and nozzle interlock for lower print interference.\u003c\/li\u003e\n\u003cli\u003eBetter thermal insulation for superior air cooling deflection.\u003c\/li\u003e\n\u003cli\u003eUnbeatable melt capacity for market leading volumetric flow.\u003c\/li\u003e\n\u003cli\u003eLow mass for improved heat conduction and thermal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCopper body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.2, 0.40, 0.60, and 0.80\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efor 1.75mm filament\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Bondtech","offers":[{"title":"0.2","offer_id":50659128934701,"sku":"","price":24.9,"currency_code":"USD","in_stock":true},{"title":"0.4","offer_id":50659123429677,"sku":"600-C-CHT-MOS-175-14","price":24.9,"currency_code":"USD","in_stock":true},{"title":"0.6","offer_id":50659123495213,"sku":"600-C-CHT-MOS-175-16","price":24.9,"currency_code":"USD","in_stock":true},{"title":"0.8","offer_id":50659123527981,"sku":"600-C-CHT-MOS-175-17","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/bondtech_NOZ01CHT41462_CHT-Nozzle-FIN-Coated-Copper-04mm_4215_3750x2500-scaled.jpg?v=1744989709"},{"product_id":"elegoo-giga-toolhead-complete-kit","title":"Elegoo Giga Toolhead - Complete Kit - Backordered","description":"\u003cp\u003e\u003cem\u003eOrders as of December 15th are waiting on Chube Conduction hotends\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCompletely configured \"out of the box\" to be fully compatible with the stock toolboard \u0026amp; fans on the giga toolhead. Plug and play with some minor firmware modifications.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/lukeslaboratory\/elegoo-giga-upgrades\"\u003e\u003cem\u003eGithub here\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/plugandplay.lukeslabonline.com\/knowledge\/article\/53\"\u003e\u003cem\u003eInstructions here - NOW COMPLETE FOR PHYSICAL ASSEMBLY, WITH GOOD INSTRUCTIONS FOR SOFTWARE.\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRELATED PRODUCT: \u003ca title=\"PEI Sheet\" href=\"https:\/\/www.lukeslabonline.com\/products\/xl-dual-sided-pei-plates?variant=51320369840429\"\u003eSINGLE-PEICE (820x820) PEI SHEET IN STOCK NOW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRELATED PRODUCT: \u003ca href=\"https:\/\/www.lukeslabonline.com\/products\/dual-sided-pei-spring-steel-sheets?_pos=5\u0026amp;_sid=37745ad91\u0026amp;_ss=r\u0026amp;variant=51320252236077\" title=\"410x410 sheets\"\u003e410x410 Sheets\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eDO NOT ATTEMPT USING CHATGPT\/GROK\/OTHER AI\/LLM SERVICES FOR INSTALL. THEIR INSTRUCTIONS ARE WRONG, AND MAY LEAD TO DAMAGING YOUR PRINTER AND UPGRADE. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlright! Here we have the long-awaited Giga toolhead conversion over to a modular, open frame design.\u003c\/p\u003e\n\u003cp\u003eWith the Chube hotend paired with the LGX Pro, experience fast, reliable extrusion upwards of 120mm3\/s! With this toolhead, you will have a workhorse of a machine that will do great with large prints!\u003c\/p\u003e\n\u003cp\u003eBeacon support is not only supported but is the primary way to be experienced! This toolhead has been achieving excellent performance with beacon contact, getting calibration standard deviations as low as 0.015mm, for effortless meshes and first layers!\u003c\/p\u003e\n\u003cp\u003eOther Highlights of the mod:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"o-paragraph\"\u003eCad published on Github\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eMake your own attachments, use your own extruders, do whatever you want!\u003c\/li\u003e\n\u003cli\u003eFuture modifications may include new toolboards (like Jupiter) or familiar favorites\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"o-paragraph\"\u003eSupports multiple extruders and hotends!\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eAlready have a spare extruder and hotend that you like? They're likely supported - take a look at the cad to make sure!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"o-paragraph\"\u003eBuilt with performance and reliability in mind:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eTested \u0026amp; Used on Joel Telling's Giga\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"o-paragraph\"\u003eUses trusted components:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eBeacon, Chube, LGX Pro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"o-paragraph\"\u003eRe-uses as much as possible from original toolhead\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eRe-uses existing Canbus toolboard\u003c\/li\u003e\n\u003cli\u003eRe-uses 5015 fans and ducts\u003c\/li\u003e\n\u003cli\u003eRe-uses 4010 fan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder-coated, Welded Steel Base\u003c\/li\u003e\n\u003cli\u003eReplaceable, customizable aluminum tool plate.\u003c\/li\u003e\n\u003cli\u003eAluminum Wings for the fans from the Giga\u003c\/li\u003e\n\u003cli\u003eLGX Pro with premade cable\u003c\/li\u003e\n\u003cli\u003eChube Conduction loaded with pre-wired heater+PT1000\u003c\/li\u003e\n\u003cli\u003eBeacon with 5m cable for direct plugin to mainboard\u003c\/li\u003e\n\u003cli\u003e.6mm Gammamaster V6 nozzle\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequired hardware for install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Lukes Laboratory","offers":[{"title":"Default Title","offer_id":50757286265133,"sku":"","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20250523_121744_3.jpg?v=1761238584"},{"product_id":"lgx-pro-metal-ht-1-75-extruder","title":"LGX Pro Metal HT 1.75 eXtruder","description":"\u003cp\u003eA\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efull metal\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003estronger and more robust LGX Large Gears eXtruder for industrial and high temperature applications with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1.75mm filaments\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHarder\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: steel drive train;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFaster\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: higher max feed rate;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStronger\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: more push force;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTougher\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: Aluminum housing;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCleaner\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e: sober design.\u003c\/li\u003e\n\u003cli\u003eAnd now…\u003c\/li\u003e\n\u003cli\u003e… even more\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eThermal Resistant\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cb style=\"font-size: 0.875rem;\"\u003eLGX® Pro Metal HT 1.75\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eextruder is supplied with:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX® Pro Metal 1.75mm\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003efeeder;\u003c\/li\u003e\n\u003cli\u003e1x Custom Nema17 30mm HT pancake stepper motor;\u003c\/li\u003e\n\u003cli\u003e1x Metal Push-in fitting M7 4mm;\u003c\/li\u003e\n\u003cli\u003e1x 2mm Hex Key (recommended tool);\u003c\/li\u003e\n\u003cli\u003e1x Powered By Bondtech sticker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso shipping with additional accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x M3x23 mm Stud with 5mm Hex with M3x4 thread;\u003c\/li\u003e\n\u003cli\u003e30mm PTFE tube to use in the Direct Drive Interface Plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis extruder only supports 1.75 mm size filament.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eLGX® Pro Metal HT eXtruder\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003euses\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBondtech’s new Dual Drive Technology\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ebased on\u003cspan\u003e \u003c\/span\u003e\u003cb\u003elarge drive gears\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch4\u003e10 cool features of the Bondtech LGX Pro Metal :\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum housing\u003c\/li\u003e\n\u003cli\u003eStrong 30mm High Temperature stepper motor\u003c\/li\u003e\n\u003cli\u003eLarger drive wheels, for increased filament grip;\u003c\/li\u003e\n\u003cli\u003eNew filament pre-tension lever – open + 4 positions – for repeated results;\u003c\/li\u003e\n\u003cli\u003eMulti-function interface socket, for tool or application quick swap;\u003c\/li\u003e\n\u003cli\u003eCompact, light \u0026amp; symmetric design, for increased performance and compatibility;\u003c\/li\u003e\n\u003cli\u003eMultiple mounting hole patterns, for easy and flexible setup;\u003c\/li\u003e\n\u003cli\u003eFull Hardened Steel Drive Train;\u003c\/li\u003e\n\u003cli\u003eSupport longer hotends with the Aluminum Interface Plug;\u003c\/li\u003e\n\u003cli\u003eMore protection against dust or particle saturated industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e1. This extruder does not allow a mount plate between the motor and the extruder.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Use at most 1A (RMS) of current to feed the stepper motor.\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Start Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Quick Start Guide\" href=\"https:\/\/www.bondtech.se\/downloads\/QuickStartGuides\/bondtech_EXT01LGX41036_LGX-PRO-METAL-Large-Gears-eXtruder_quick-start-guide.pdf\"\u003e\u003cstrong\u003ehttps:\/\/www.bondtech.se\/downloads\/QuickStartGuides\/bondtech_EXT01LGX41036_LGX-PRO-METAL-Large-Gears-eXtruder_quick-start-guide.pdf\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTDS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"TDS\" href=\"https:\/\/www.bondtech.se\/downloads\/TDS\/Bondtech_EXT01LGX41664.pdf\"\u003e\u003cstrong\u003ehttps:\/\/www.bondtech.se\/downloads\/TDS\/Bondtech_EXT01LGX41664.pdf\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bondtech","offers":[{"title":"Default Title","offer_id":50973103915309,"sku":"EXT01LGX41664","price":249.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/bondtech_EXT01LGX41036_LGX-PRO-Metal-HT-eXtruder_3750x2500-scaled.webp?v=1752508776"},{"product_id":"chube-compact","title":"Chube Compact - Preorder","description":"\u003cp\u003eIntroducing our latest labor of love, Chube Compact! This hotend is everything you know and love about Chube, but \u003cem\u003emore\u003c\/em\u003e Compact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor launch, we are temporarily pricing Compact at $140, and in the future we will move to $165\u003c\/strong\u003e. Fully manufactured in Wrightstown, WI, USA. HEATER AND PT1000 AUTOMATICALLY INCLUDED!\u003c\/p\u003e\n\u003cp\u003eTHIS ITEM IS ON PREORDER! PREORDERS WILL SHIP COMPLETE WHEN ALL LINE ITEMS ARE IN STOCK. CANCELLATIONS NOT ALLOWED FOR PREORDERS.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lukeslabonline.com\/blogs\/news\/chube-compact-update-11-14-2025?_pos=5\u0026amp;_sid=31d34b007\u0026amp;_ss=r\" title=\"Blog Update\"\u003eBlog update \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.lukeslabonline.com\/blogs\/news\/january-2026-blog-post\" title=\"Blog Update\"\u003ehttps:\/\/www.lukeslabonline.com\/blogs\/news\/january-2026-blog-post\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e33mm meltzone before nozzle,\u003c\/li\u003e\n\u003cli\u003eSame construction as other Chubes - M3 Screws, high-quality materials, cartridge heater and thermistor\u003c\/li\u003e\n\u003cli\u003eV6 Nozzle\u003c\/li\u003e\n\u003cli\u003eMetal Shield + Silicone Sock\u003c\/li\u003e\n\u003cli\u003e6x16mm heater standard (compatible with 6x15, 6x16, and 6x20mm heaters)\u003c\/li\u003e\n\u003cli\u003e3x15mm thermistor cartridge\u003c\/li\u003e\n\u003cli\u003eChalice Titanium Heatbreak\u003c\/li\u003e\n\u003cli\u003eMass: 50g\u003c\/li\u003e\n\u003cli\u003eOAL with nozzle: 47.2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's new?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved thermal resistance to cooling fans (even w\/out silicone sock!)\u003c\/li\u003e\n\u003cli\u003e6x16mm Heater (will fit a 6x20 if space is allowed for stick-out)\u003c\/li\u003e\n\u003cli\u003e4x16mm M3 Bolt circle mounting pattern (Dragon but M3)\u003c\/li\u003e\n\u003cli\u003eIncluded silicone sock for low-temperature excellence (sock rated for 300c medium-long term use)\u003c\/li\u003e\n\u003cli\u003eNo Meltzone Adapter \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e100% Manufactured and Assembled in the USA (Silicone Sock\/heater\/PT1000 excluded)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included with my Chube Compact Hotend?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 stainless steel heatshield\u003c\/li\u003e\n\u003cli\u003e1 Black Silicone Sock\u003c\/li\u003e\n\u003cli\u003e1 6x16mm 80w heater cartridge\u003c\/li\u003e\n\u003cli\u003e1 PT1000 thermistor\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 torx key\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e1 hex key\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 spare grub screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003e2 spare torx screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eChube sticker\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400;\"\u003eLuke's Lab sticker\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/Chube_Features_2.png?v=1764865243\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/Chube_Accessory_Compatibility_Chart_2.png?v=1764865243\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Luke's Laboratory","offers":[{"title":"Default Title","offer_id":51340119769389,"sku":null,"price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/7P7A4660.jpg?v=1778684512"},{"product_id":"abs-gf-two-step-process-filament","title":"ABS GF -  Two Step Process Filament","description":"\u003cp\u003eA very long-fiber ABS-GF for your Two Step Process needs!\u003c\/p\u003e\n\u003cp\u003eShipping note: despite what the Shop App may tell you, filament has an $8 minimum shipping charge\u003c\/p\u003e\n\u003ch4\u003eQuick Info:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFills: 15% GF, 10% Mineral Filler for .1% shrinkage in 30c ambient!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuantity: 1KG\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS-MD-GF \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003ePrint Temperatures: 250-310C (Recommended 280c+)\u003c\/li\u003e\n\u003cli\u003eBed Temperatures: 70-100C\u003c\/li\u003e\n\u003cli\u003eHeated Chamber Recommended - 50-80C, but will print easily far lower due to low shrinkage\u003c\/li\u003e\n\u003cli\u003eComes on a high-temperature spool - will survive drying at recommended drying temps\u003c\/li\u003e\n\u003cli\u003eThis is a special, extremely low warp blend, it's been printed open air! \u003c\/li\u003e\n\u003cli\u003eIncludes a resealable filament bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnjoy the durability of ABS with the extra stiffness and strength of glass fibers with ultra low warp!\u003c\/p\u003e\n\u003cp\u003eSpecial Formula out of the RacoonWorks, this ABS is sure to delight with its easy-to-print nature, high flow, and beautiful color!\u003c\/p\u003e\n\u003cp\u003eDue to the fibers in this filament, we recommend using a .6mm nozzle, with .5mm being the \u003cem\u003eabsolute smallest\u003c\/em\u003e size.\u003c\/p\u003e\n\u003cp\u003eWe recommend drying this filament before printing with it.\u003c\/p\u003e\n\u003cp\u003eSpecial Notes: Don't sand this material without proper ventilation and PPE. Fillers may irritate lungs when made airborne. \u003c\/p\u003e\n\u003cp\u003eAppearance notes: The material is made with ultra-long-aspect ratio glass fibers, resulting in a very textured appearance on the spool. This is a byproduct of how the fibers interact during the filament extrusion process (and was specifically tuned for best layer bonding) \u0026amp; isn't detrimental to the final part produced. \u003c\/p\u003e","brand":"Luke's Laboratory","offers":[{"title":"Black","offer_id":51715252650285,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Makita-Like Blue","offer_id":51715252683053,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Violet","offer_id":51715252715821,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":51715252748589,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20260608_141243.jpg?v=1781055827"},{"product_id":"two-step-process-plated-copper-nozzle-fin6-v6","title":"Two Step Process - Plated Copper Nozzle - FIN6 - V6","description":"\u003cp\u003eFIN6 is a V6 nozzle that integrates all of the very best parts of the FIN standard but in a V6 size!\u003c\/p\u003e\n\u003cp\u003eThese are 500c rated, Nickel Plated Copper Nozzles, excellent for general use!\u003c\/p\u003e\n\u003cp\u003eMade to high quality standards, these nozzles still won't break the bank.\u003c\/p\u003e\n\u003cp\u003eOptimized with low pressure geometry for best possible performance. This geometry uniquely reduces backpressure, resulting in higher flow rates.\u003c\/p\u003e\n\u003cp\u003eMade to integrate the FIN standard published by Slice Engineering into a V6 format!\u003c\/p\u003e\n\u003cp\u003eThese nozzles are made in house, and plated in the USA\u003c\/p\u003e","brand":"Luke's Laboratory","offers":[{"title":".4","offer_id":51783914455341,"sku":null,"price":22.0,"currency_code":"USD","in_stock":false},{"title":".5","offer_id":51783914488109,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true},{"title":".6","offer_id":51783914520877,"sku":null,"price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/files\/20260411_175339.jpg?v=1776479670"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/8129\/8105\/collections\/20250930_141824_2.jpg?v=1775750220","url":"https:\/\/www.lukeslabonline.com\/collections\/front-page-sellers.oembed?page=3","provider":"Lukes Laboratory","version":"1.0","type":"link"}